|
 
13 SEER Minimum
R22 Phase out.
Home Comfort
| |
 The
MasterCool Contractor line of whole house
coolers are the best in the business. These coolers feature a range of cooling
and energy-saving capacities. These coolers can be mounted on roofs, set on
pads, or hung on an outside wall. The cooler's low-profile design ensures that,
when mounted at ground-level, nothing will be visible above the fence-line. You
can also add one of our coolers to an existing air conditioning system. Special
features include...
MasterCool Cooling Media: A cooling pad that achieves up to 90 percent
evaporative efficiency and is highly durable.
Automatic Thermostat Control System: This feature automatically maintains
your selected temperature using the least amount of energy possible. A timer
even allows you to turn your cooler on or off in up to 8-hour intervals
intervals.
| MasterCool
Contractor Whole House Coolers |
|
 | Lifetime Limited Warranty: Covers leakage due to rust-out
of wet section cabinet. Two-year warranties on the pump and motor
and a five-year warranty on the MasterCool pad. See printed warranty
for full details.
| Energy Efficiency: Uses as little as 25 percent of the
electricity required for air conditioning. That's up to 75 percent
savings in electric costs.
| Air Flow: Industry Standard Ratings ranging from 4800 to
6500 cubic feet per minute (CFM)
| Factory Installed Motor: 1 horsepower UL recognized motor
designed/tested specifically for use in an evaporative cooler.
Special features include all-copper windings for increased
reliability and longer life. High torque and isolated vibration
characteristics make it quiet and efficient.
| Factory Installed Pump: Thermally protected and U.L.
recognized.
| Factory Installed Drain Pump: Keeps the cooler clean by
periodically draining stale, mineral-laden water and replacing it
with cool, fresh water.
| MasterCool Cooling Pads: The best cooling media in the
industry. Available in 8" or 12" widths.
| Discharge Options and Cabinet Sizes: Four down-discharge
and four side-discharge models in a range of cabinet sizes suitable
for home, mobile home, garage or workshop settings. Low profile
cabinet is a foot shorter than conventional coolers.
| Cabinet Construction: Corrosion resistant, heavy gauge
galvanized steel construction in a welded, maintenance free cabinet
with reinforced corner posts.
| Polybond Finish: AdobeAir's patented Polybond finish is
tough and attractive.
| Automatic Temperature Controls: Automatically controls
temperature while reducing energy consumption. |
| | | | | | | | | |
|
MasterCool Contractor High Performance Up-Discharge
You won't find this revolutionary single-inlet evaporative cooling system on any
of your neighbors' roofs. That's because the MasterCool Contractor High
Performance Up-Discharge was designed to be out of sight to meet the strictest
association codes, covenants and restrictions.
Nothing Visible above the fence line. The attractive single-inlet
styling blends in with the most contemporary home designs. Ground level mounting
on an exterior wall of your home (preferably your garage wall) assures
compliance with the strictest association codes, covenants and restrictions.
 Minimum
space required. The MasterCool Contractor High Performance Up-Discharge
takes up about as much space in your garage as a small shelving unit, and can be
mounted through your garage wall and connected to your primary ductwork. Easy
access makes service a breeze. With the addition of a dampened register you can
even cool your garage, too!
|
Mastercool Contractor
