|
 
13 SEER Minimum
R22 Phase out.
Home Comfort
| |
| |
 |
 |
|
|
Whole House Evaporative Coolers
 |
The MasterCool II line of whole house coolers are among the most
efficient, high quality available today. These coolers feature a
range of cooling and energy-saving capacities. With our aids and
accessories, the coolers can be mounted on roofs, set on pads, or
hung on an outside wall. You can also add one of our coolers to an
existing air conditioning system.
Choose from our High Performance HC Series or the Original MC Series
of coolers. Both feature the Mastercool
Cooling Media, a pad that achieves up to 90 percent
evaporative efficiency and is highly durable.
 HC
Series
The High Performance MasterCool
For the most demanding cooling requirements or where colder
temperatures are required, the HC Series offers performance never
before available in residential evaporative coolers. It provides all
of the fine features of the original MasterCool plus these added
benefits:
 | Up to 5 degrees colder air for more comfort
| 12-inch thick pad for savings up to 75 percent compared to air
conditioning
| Greater cooling capacity for today's larger homes
| Commercial-grade components for longer life
| The coldest temperature available in residential evaporative
coolers |
| | | |
 MC
Series
The Original MasterCool
The original MC Series Mastercool II continues to be a popular
choice for many cooling applications. This advanced, single-inlet
cooler offers:
| Colder air than conventional aspen-pad coolers
| Original 8-inch thick pad for savings up to 70 percent
compared to air conditioning
| Plus all of the advancements that have made MasterCool the
best cooler in the industry |
| |
| MasterCool
II Whole House Coolers |
|
| 10-Year Limited Warranty: Covers leakage due to
rust-out of wet section cabinet for ten years. Two-year
warranties on the pump and motor and a five-year
warranty on the MasterCool pad. See printed warranty for
full details.
| Energy Efficiency: Uses as little as 25 percent
of the electricity required for air conditioning. That's
up to 75 percent savings in electric costs.
| Air Flow: Industry Standard Ratings ranging
from 4200 to 6500 cubic feet per minute (CFM)
| Motor: Choose from 1/2, 3/4 or 1 horsepower
motors. All motors are UL recognized and are
designed/tested specifically for use in an evaporative
cooler. Special features include all-copper windings for
increased reliability and longer life. High torque and
isolated vibration characteristics make it quiet and
efficient.
| Pump: Thermally protected and U.L. recognized.
| MasterCool Cooling Pads: The best cooling media
in the industry. Available in 8" or 12"
widths.
| Discharge Options and Cabinet Sizes: Four
down-discharge and four side-discharge models in a range
of cabinet sizes suitable for home, mobile home, garage
or workshop settings. Low profile cabinet is a foot
shorter than conventional coolers.
| Cabinet Construction: Corrosion resistant,
heavy gauge galvanized steel construction in a welded,
maintenance free cabinet with reinforced corner posts.
| Polybond Finish: AdobeAir's patented Polybond
finish is tough and attractive. |
| | | | | | | |
|
|
|
|
|
 |
|
 |
|
Matercool II
